Making A Workbench Out Of Salvaged Things (part 1 of 2)

In this video I start making a new workbench for my workshop using salvaged materials.  

I used three sets of drawers salvaged from an office clearance, some salvaged plywood donated to me by a friend, and some parts from my old workbench.  

I began by making a large 3/4 inch plywood box to accommodate the three sets of drawers and added a piece at the back to keep it rigid and square.  

I added the legs from my old workbench to this one, as I wanted the new workbench to be the same height so there was really no need to make them again.  

I also salvaged an old drawer from the old workbench and added it to the new one. 

Images: