| Page 6 | Rag 'n' Bone Brown - UK Woodworking and Restoration YouTube projects

Rustic Coffee Table Using Scaffold Boards

In this video I make a rustic coffee table using some old scaffold boards I found on top of a skip and some metal coffee table legs which I salvaged as part of an office clearance

Spray Paint: https://amzn.to/2yw4gOX (UK)

As an Amazon Associate I earn from qualifying purchases

In this video I'm going to be making a coffee table using some old scaffold boards I found on top of a skip which I took after asking permission ofcourse.

Making Bedside Tables / Nightstands

In this video I make two bedside tables / nightstands with a retro/mid century feel.

Vlog 6 where I talk about the shop: https://bit.ly/2O33yj1

Varnish I use in this video: https://amzn.to/2MfgoIV (UK)

Jay Bates video I mentioned: https://bit.ly/2Mg5ORZIn

As an Amazon Associate I earn from qualifying purchases

Refinishing An Ercol Giraffe Room Divider

In this video I'm going to be restoring the finish on a 1956 Ercol Giraffe room divider for a client.

I've never worked on a piece of furniture this old or this valuable before.

And the first mission was collecting it in my small van, I had to get it in by laying it down on it's side, and because it's talled than my van is long, I needed to the door of my van shut with some rope and needless to say I drove home very carefully.

First I had a look around the piece partly to see what work I'd need to do, and partly pure admiration at what a beautifully wel

Coffee Table With Metal Legs

Recently I salvaged some metal coffee table legs - these were being thrown away as part of an office clearance at my place of work, and originally they had melamine tops which were really badly worn and damaged after years of use, and I knew I could make use of the metal legs, so I asked for the metal legs to be put aside for me. I think I took about 6 or 7 pairs of these in total.

And in this video I'm going to make a solid wood table top for one of the pairs of legs and I'm also going to grind off the paint from the metal legs which you'll see later in the pr

Repairing & Restoring Dining Chairs

Recently I made a couple of desks as a commission for a client, and when I was delivering those to his home, he mentioned he had some solid beech dining chairs that were in need of repair. There were 6 in total but initially I just took 4 of them away, and in this video I'm going to be showing how I repaired and re-finished them.

The main problem with these chairs, as you can see is that joints are loose, so the chairs had quite a bit of movement in them.

When I lifted the seat pad out, I found there was another problem - the corner brackets which sho

Making Custom Desks (part 3 of 3) - Worktop, finishing, castors & keyboard shelf

Welcome to part 3 of the desk builds. In the last video I made the drawer and drawer housing for the desk.

And in this one I'll be working on the desk top, the castors, adding a keyboard shelf and getting some glass for the desktop to protect the wood.

First I used my trim router to add a roundover to the top edges of the worktop

I then brought the worktop in to the workshop so that I could sand everything smooth and remove any burn marks left by the router.

I used my block plane just to ease over the bottom edges of the worktop

Then

Making Custom Desks (part 2 of 3) - drawers and drawer housing

Welcome to part 2 of the desk build.

Making Custom Desks (part 1 of 3)

Peter Millard Clamping Square video: https://youtu.be/kf-jOFrWTXo

In this video I'm going to start working on a commission - this one came about thanks to my uncle who put my name forward to someone who wanted two custom desks built, one for each of his sons.

I got in touch and we discussed his requirements so I could start designing the desks - he wanted the desks

to have some shelves and a single drawer for storage

something dismantleable so that it can be easily transported

mounted on wheels so it can be moved around easily

Making A Plywood Armchair - John Heisz Collaboration

In this video I make an armchair using one sheet of plywood.

This project is a collaboration with John Heisz from I Build It - check out his video here: https://youtu.be/-uvjAVQqnyo

John's YouTube Channels:

I Build It main channel:

https://www.youtube.com/user/jpheisz

I Build It second channel:

https://www.youtube.com/channel/UCzGbp-rRVNwyFhn9gHoZr5g

I Build It Scrap Bin:

https://www.youtube.com/channel/UCaJsEh2_YxWHMcjASs4cJcA

Drinks Cabinet Makeover - Mid Century Restoration

tetet