Necklace Stand With Brass Accents - Making A Christmas Gift

In this video I make a necklace stand as a Christmas gift using salvaged wood and some brass dowels

First I went looking for materials to use - and I found some snooker cue offcuts from a previous project and some dowel.

Removing A Window & Replacing With Alcove Oak Shelving

In this video I remove a window, and make an oak shelving unit to fit inside the window opening alcove.

Simple Floating Corner Shelf - No Specialist Hardware Or Fixings

In this video I make a couple of simple and modern DIY corner floating shelves for our new living room.  I used some offcuts of MDF and a piece of pine to make the shelf, and the whole project took a couple of hours to do - nice and quick.  The floating shelf requires no specialist hardware or fixings.

Making A Jewellery Box - With Compound Mitre Angle Cuts

In this video I make some jewellery boxes using wood from an old reclaimed fireplace surround.  I think the wood might be meranti but I'm not sure.  This project was my first time cutting compound mitre cuts at the mitre saw - something that I've wanted to try for a while and it seemed like the perfect simple woodworking project to try it out on.  

 

Making Vinyl Display Stands - Record Storage

In this video I make some vinyl display stands - perfect for flicking through your record collection. These make a great record storage solution. Made from reclaimed oak.

How To Remove Stains, Re-finish & Oil Wooden Kitchen Counter Worktops

In this video I will be showing how to do scraping, sanding, and re-finishing on some wooden kitchen worktops / work surfaces / counter tops at a local AirBnB. I need to remove the water stains, heat marks, wear and mould and strip down to the bare wood, and then restore the natural beauty of the wood - which I do by oiling using a hard wax oil finish. This restoration took 6 hours in total, which excludes thie time it took for the finish to dry.

Restoring A Vintage Oak Cutlery Box

In this video I restore a vintage viners oak cutlery box. There were a few heat marks and water stains to remove from the lid using oxalic acid, I then re-finish with walnut stain to restore the colour and then use my handmade oil wax. The brass hardware needed cleaning up, and I also fit new felt to tidy up the inside. There was also a small repair to the bottom trim for which I use epoxy.

Making Some Bedside Drawer Box Shelves

In this video I make some drawer box style wall mounted bedside shelves to match a bedside table / nightstand that I made in a previous video for an Etsy customer.

 

Making A Headphone Stand

In this video I make a headphone stand using a bent lamination technique.

3 Simple Woodworking Projects - Gift Ideas - Including A Desk Tidy Smart Phone Stand & Photo Display

In this video I make 3 small, quick and simple woodworking projects that would make great gifts (except for the door stop wedges ofcourse, no one wants to be given one of them for Christmas!). The first project is a photo or paper display stand made from some salvaged cherry (it might not be cherry!). The second is some oak door wedges. The third is a sapele and oak desk tidy smart phone holder stand that holds a mobile phone and some pens.

Pages