| Page 37 | Rag 'n' Bone Brown - UK Woodworking and Restoration YouTube projects

Custom Desk And Speaker Stands With Ikea Lerberg Legs (part 2 of 2)

In part 2 of the build, I got started making the monitor stands.

I used some scraps of ply I had in the workshop, and they were varying thicknesses – so I needed to compensate by cutting some of the panels 3mm wider to keep both stands looking consistent.

I cut and assembled a simple plywood frame consisting of two side panels and a top panel with glue and nails.

Custom Desk And Speaker Stands With Ikea Lerberg Legs (Part 1 of 2)

In this video I make a custom desk for a friend, who is a local musician. She was looking for a desk where she could sit and work on music production and mixing with some stands for her monitor speakers. She wanted a desk with character in reclaimed wood, and she sent me a few photos of the sort of thing that she was hoping for. I did some 3D drawings for her in SketchUp and we settled on a design.

For materials, I’d use some reclaimed pine floorboards which I acquired from a neighbour (they were going to be thrown away).

5 YouTube Woodworkers in the U.K. that deserve more subs!

Here are 5 British YouTube woodworkers that in my opinion deserve more subs! And why you should check them out.

Please write your recommendations in the comments so that I and others can check them out. Thanks!

Links to their channels are below:

Stephen's 8x6 Workshop: https://goo.gl/iQC2IY

Badger Workshop: https://goo.gl/cg4aDV

Susan Gardener: https://goo.gl/nbdKU5

Stuff I Made: https://goo.gl/jGkLTl

Happy Wife Happy Life: https://goo.gl/K8GnG4

Making A Cat Scratching Post Using Pallet Wood And Concrete

I made the mistake of buying a cat scratching post that was too small for my cat to use comfortably... So I gave it away (to someone with a kitten) and thought I'd make one for my cat, Dylan.

For materials, I used a pallet that I found in my recent "how to get wood for free" video. I'd use the stringers to make the post, and the slats to make the base. I dismantled and de-nailed the pallet using a crowbar.

Making Simply Picture Frames

In this video I make some simple custom sized picture frames for my brother. He sent me the dimensions, there were five in total.

He wanted them spray painted black which is a good thing for two reasons – firstly I could use some scraps of wood that I had piling up in the workshop that don’t match, as the paint will disguise that.

AEG BSB 18 CBL Brushless Hammerdrill Driver - First Impressions

AEG sent me their BSB 18 CBL Brushless Drill to try out. In this video, I unbox and compare it to my Bosch PSB 1800 LI-2 drill.

Available to buy on Amazon UK with 2x 4Ah batteries: http://amzn.to/2mpkgdZ or 2x 2Ah batteries: http://amzn.to/2mpt7fT

Available to buy Amazon US with 2x 2Ah batteries: http://amzn.to/2ldGqjd

As an Amazon Associate I earn from qualifying purchases

Simple Panel Cutting Jig for DeWalt DW745 tablesaw

In this video I make a simple panel cutting jig for my tablesaw the DW745 using salvaged materials.

Mobile Camera Stand - using concrete and reclaimed materials

In this video I make a mobile camera stand for workshop use, using an old plastic bucket, some concrete, some castors, a salvaged fence post and some scraps of oak. This is inspired by the recent builds by Jeremy Schmidt and Jay Bates.

Jay Bates Studio Camera Stand video: https://goo.gl/O6pAG3

Jay Bates YouTube Channel: https://goo.gl/Q4wbw6

Jeremy Schmidt's Rolling Concrete Camera Stand video: https://goo.gl/T4pR6K

Jeremy Schmidt's YouTube Channel: https://goo.gl/0ej0b4

Making A Cat House For Two Using Scraps Of Wood

In this video, my brother Alan visits my workshop bringing with him some scraps of sheet materials found in his shed - some pieces of various sizes of MDF, ply and chipboard.

Alan wanted a cat house for his two cats George & Jasper, and he already had an idea for the design he wanted, so we first did a quick drawing in SketchUp to figure out how to make best use of the materials that we had to create that design.

Making A Treasure Chest Blanket Box / Ottoman (part 2 of 2)

In this video I start by finishing off the arcs for the lid that I started making in the previous video. I cut one of them in half on the bandsaw to give me 2x thinner ones (for each end) and one wide one (for the middle of the lid).

I needed to cut a rebate joint in to one side of each end arc and both sides of the central arc. I did this by putting my trim router upside down in the vise to use as a makeshift router table - which worked well.

Then I glued and clamped the arcs in place.