Dressmakers Fabric Scissors and Thread Snip Set: https://amzn.to/351Cx7U (UK) https://amzn.to/38qb7Lg (US) As an Amazon Associate I earn from qualifying purchases
In this video I make a rustic dining table and pair of bench seats using reclaimed scaffold boards. Nice to work with salvaged materials again, but unfortunately this job did not go according to plan.
In this video I continue the project to make a dardboard cabinet using some walnut MDF to hold a dartboard, darts and a toe line as a commission for a client.
In this video I make a ladder style book shelf design for my brother. The shelves are made of walnut veneerd ply, and the uprights and rails are made from 2 by 2 spruce / pine painted black in a mid century modern style. Plans & cut list for this project are available on my Etsy or free to my patrons on Patreon (see links below)
In this video I make a mixing board case for an Alice 828 mixing board for my friend Jason at The Crunch Recording Studio in Badersfield, Norfolk. In this one I use some sapele veneered particleboard and make the edge banding from solid sapele and I make a wrist rest using some foam and faux leather.
In part 2 of converting the teak veneered mid century modern bookcase cabinet, I make and fit a leg assembly for the base of the unit, make and fit the cabinet doors using some euro hinges, remove water stains using oxalic acid, re finish the parts that needed tidying up, and cut the shelves to length - and that's it done!
In this video I convert an old teak veneered mid century modern bookcase cabinet that has some structural problems as well as stains and wear and tear in to a slimmer, taller cabinet. I completely disassemble it, add a leg assembly, remove the drawers and convert the bottom section in to a cabinet with doors, and also address some of the worn edges and take care of the water stains with some minor re-finishing works.
In this video I make some tapered and angled legs for a concrete table top using birch plywood as a commission for my friends at Courage Noble, an independent barbershop in Norwich
I used birch plywood to make the legs and leg mounts and I later fit them to the concrete table tops at the barber shop