Room Renovation: Architrave, Skirting Boards, Decoration, Taping & Filling

Submitted by Keith on Monday 23/11/2020

In this video I install architrave, skirting base boards and do all the taping and filling and decoration to complete the renovation works for the two rooms in our bungalow. I also cover the total costs of the project to install a wall and doors, and show final reveal of the two completed rooms.

Part 1 Building The Wall: https://youtu.be/z6xIwqp8YMo
Part 2 Hanging The French Doors: https://youtu.be/frRmhwXJE9w

Fitting & Hanging French Doors

Submitted by Keith on Thursday 29/10/2020

In this video I fit and install a pair of internal french doors following last week's video when I built a stud partition wall to create a new office space/guest bedroom for my fiance.  I'll show you how to hang doors, or at least how I do it anyway!  This is only the fifth door I've ever fitted, and it's my first time fitting french doors, so a bit of a learning curve but it went pretty well.

Here's the previous video where I built the wall:
https://youtu.be/z6xIwqp8YMo

Building A Wall In Our Bungalow

Submitted by Keith on Thursday 29/10/2020

In this video I'll be building a stud partition wall in our home, a  1930s bungalow.

We needed to create an office space for Ria (my fiance) / guest bedroom so we chose to divide up a large space in the house that was used by the previous occupants as a living room.

I'll show you how to build a wall (or at least, how I build one!) and some tricks along the way.

0:00 Intro
0:16 Why I'm Building A Wall
1:45 Floor Repairs
4:01 Building The Wall

Stud finder (4 in 1) device https://amzn.to/2H978Jy (UK)

Geometric Plywood Plant Stand With Continuous Grain

Submitted by Keith on Tuesday 13/10/2020

In this video I make an octagonal geometric planter / plywood plant stand in a mid century modern style with tapered legs using some birch ply offcuts left over from a previous build.

Plans are available for a small fee at my Etsy store: https://www.etsy.com/uk/listing/868115219/geometric-octagonal-plant-stand or for free if you choose to support the channel via my Patreon page or YouTube membership (links below).

DIY Building A Shed From Scratch - Complete Project (Fast Version)

Submitted by Keith on Tuesday 08/09/2020

This video shows how to build a shed from scratch - from start to finish.

This is the complete / fast version of the project.  For more detail featuring all the planning, thought process, mistakes and opinions, please see the full 7 part video series linked below:

Finished Shed - Interior / Costs / Timescales / Q&A

Submitted by Keith on Tuesday 08/09/2020

This is the last in the series of my shed build project where I work on the interior of the shed, go through the total costs of self building a shed plus the timescales, and I respond to viewer comments and questions throughout the project.

0:00 Intro
0:30 Shed Interior
1:41 Shed Tour
2:53 Shed Cost
6:02 Project Timescales
7:17 Shed Q&A

Ali Dymock's planning permission video: https://youtu.be/fsTrMDn3f6k

Ali Dymock's out building heights video: https://youtu.be/N1yM-b3rTTc

Shed Door & Finishing Touches (PART 6 SHED BUILD PROJECT)

Submitted by Keith on Tuesday 08/09/2020

In this video I make a door with hardware for the shed, and add some finishing touches including working on sealing up the windows and adding trim, guttering and water butt connections, adding rodent proof mesh, soffit boards and ventilation and adding some paving outside.

Previous episode: https://youtu.be/6jpUm8OPOHE
Next episode: Coming Soon (early access available via Patreon)

#woodworking #shed #door

Thanks for watching!

Please subscribe, click like if you like, and hit the bell icon for future video notifications

Making The Shed Roof (PART 5 SHED BUILD PROJECT)

Submitted by Keith on Tuesday 08/09/2020

In this video I make the roof for the shed, which involved making two timber frames, sheathing the roof with plywood and finally adding roof felt - although I also talk about the other roof coverings I considered which included EPDM rubber, onduline bitumen roof sheets.  The roof felting process did not go well - at all!  But hopefully it will be watertight and weatherproof, and that's the main thing!

Previous episode (shed cladding) : https://youtu.be/9YyG93L8eZk
Next episode (shed door and finishing touches) : https://youtu.be/L2j08yz34Zw

Cladding The Shed With Shiplap (PART 4 SHED BUILD PROJECT)

Submitted by Keith on Tuesday 08/09/2020

In this video I'll be adding the cladding to the shed using some pressure treated (tanalised) tongue and groove shiplap cladding.  I also explain how to fit the cladding to allow for expansion and contraction of the wood, and why I chose the cladding material I did over others that are available like featherboard, loglap, pvc etc.

Previous episode (Shed Wall Framing): https://youtu.be/-W5CslI9vaQ
Next episode (Shed Roof): https://youtu.be/6jpUm8OPOHE

#woodworking #shed #carpentry

Thanks for watching!

Shed Walls and Framing (PART 3 SHED BUILD PROJECT)

Submitted by Keith on Tuesday 08/09/2020

In this video I start to frame the walls of the shed, install the windows and erect the structure. I used 47mm square tanalised timber.  I also talk through how I designed the shed and how we wanted it to fit in with the surroundings. 

Previous video (Shed Floor): https://youtu.be/K9m-PyU2Y18
Next video (Shed Cladding): https://youtu.be/9YyG93L8eZk

#woodworking #shed #diy

Thanks for watching!

Please subscribe, click like if you like, and hit the bell icon for future video notifications

Pages